Dark Sun Character Trees

Here's some old rules that might be useful at some point:


CHARACTER TREES

DARK SUN™ campaigns are set in a violent world. Powerful magics and psionics, desperate hordes of raiders, and even the unforgiving desert wastes all conspire against player characters—death is not at all uncommon on Athas, nor is it uncommon for player characters in DARK SUN campaigns.

Replacing a fallen player character of high level with a novice first level character is never satisfying for the player. Also, where this new character fits into the plot is usually contrived on the spot.

In DARK SUN campaigns, players are encouraged to use character trees, where they play with only one character at a time, but they have four to call upon at the beginning of any particular adventure.

In brief, a character tree consists of one active character (which the player is using as his player character) and three inactive characters. the active character takes part in the adventure, performing actions in the campaign world. When a new adventure begins, the player may switch to one of his inactive characters or keep his previously active character to continue play.


SETTING UP A CHARACTER TREE 

To begin a character tree, a player should completely roll up four characters. Once this is done, the player selects the character that he intends to run for the first adventure, making that one his 'active" character. the other three are inactive.

Alignment

The four characters that make up a player's character tree are unrestricted as to class or race; any combination is acceptable. However, the alignment of these characters is restricted. All of the four characters in a character tree must be either good, neutral, or evil. Devotion to chaos or law makes no difference, however. 

For example, one character tree might have a chaotic good dwarven gladiator, a lawful good thri-kreen fighter, a neutral good human bard, and a chaotic good elven preserver. the thri-kreen could not be lawful evil or even lawful neutral and still be a part of that character tree. 

If a character is forced to change alignment so that it no longer fits within the tree, that character must be discarded (or, optionally, the player may discard the other three, inserting three new characters into his tree and adopt this new alignment). 

Discarded characters should be given to the dungeon master for use as NPCs.


CHANGING CHARACTERS 

There are three instances when a player may switch the character he wishes to use in play: between adventures, during an adventure, or upon an active character's death.

Between Adventures

When an adventure is concluded (in the eyes of the DM, that is), a player may switch his active character for an inactive one. The player is not obligated to do so, and may keep one character active through any number of consecutive adventures.

During an Adventure

Within the scope of the campaign world, calling upon another character to replace the active character requires a substantial investment in time, whether for sending messages or journeying and searching for the transient inactive characters of the tree (psionics and magic may mahe this task easier, but cannot solve all the problems). The DM should sparingly allow players to switch their active character during an adventure, and usually impose a 3d6 day delay. The DM should never allow switching during critical or dangerous scenes of an adventure. Any switching of characters during an adventure is subject to the discretion of the DM, who may freely veto any request to do so.

Upon an Active Character's Death

When the active character dies, one of the inactive characters on the tree is assumed to arrive on the scene within one day (if possible). The player picks which inactive character will arrive and must subsequently roll a new first-level character to occupy the vacated spot on the tree. If circumstances mahe it difficult for a new character to arrive, the DM may be forced to extend the period before the newly activated adventurer arrives.


CHARACTER ADVANCEMENT

The active character in a campaign receives experience points and advances in levels just as described in the Player's Handbook. 

Every time the active character goes up a level of experience, the player may also advance one of his inactive characters one level. the inactive character chosen must be of a lower level than the active character. Adjust the experience point total on that inactive character's sheet to the minimum number for the new level attained. 

For purposes of character tree advancement, multi-and dual-classed characters that are inactive may only advance in one class. As active characters, multi-class characters cause an inactive character to advance when he increases one level in each of his classes. A dual-classed character causes an inactive character to advance with every level he attains. 

For inactive multi-class characters, care must be taken that a single experience point total can correctly yield the level combination. In general, an inactive multi-classed character should never be more than one level different in each class (3,3,4 is okay, 3,3,9 is not).


THE STATUS OF INACTIVE CHARACTERS

Inactive characters are not NPCs or followers. They aren't involved in the adventure at any time. At no time will a player's active and inactive characters come into contact in the campaign world. 

When not in play, inactive characters are assumed to be elsewhere on Athas, performing other tasks. 

All characters in a character tree are assumed to know each other and are working toward similar ends. the player may invent connections—the characters are all sons of the same powerful woman, are distant cousins, friends from childhood, etc. However, there is no need to have any relationship between them—the player may decide that the individuals in his character tree have no more than a passing acquaintance with one another. 

USING THE CHARACTER TREE TO ADVANTAGE 

The character tree's chief purpose is to give every player a pool of adventurers to choose from for different situations or when one of his characters dies. The player is familiar with these characters and can apply their strengths more readily than he might be able to with freshly created characters. However, if care is taken, the character tree can be a valuable tool to the player in an extended campaign. 

As only one inactive character gains a level of experience every time the active character does so, deciding which character to advance might be a decision based on which direction the campaign seems to be taking. If, for instance, a large war is in progress, a player may wish to use his fighter for his active character. If the war is winding down, he might want to advance inactive non-fighter characters for the post war adventures to come. 

As another example, the quest might be a dangerous trek across the wilderness to steal a magical item from an ancient defiler's mansion. the player might use his ranger character to make the journey, but all the while might be using his inactive character advancements to make his thief more powerful for the final assault on the mansion.


EXCHANGES BETWEEN CHARACTERS

Even though characters are on the same tree, they cannot freely exchange equipment, magical items, cash, or personal possessions. Keep separate lists for all such items. In some instances, if there is a compelling reason to do so, characters may exchange important items or information, but this is an option that can be easily abused. In general, items stick with the original character and that's that.


--
If I esteem mankind to be in error, shall I bear them down? No. I will lift them up, and in their own way too, if I cannot persuade them my way is better; and I will not seek to compel any man to believe as I do, only by the force of reasoning, for truth will cut its own way.

I could not love thee, dear, so much,
Loved I not Honor more.